FAQ

How do I configure an IXICA SIP trunk and multiple DIDs in 3CX V20?

IXICA · 3CX V20 SETUP FAQ

How do I configure an IXICA SIP trunk and multiple DIDs in 3CX V20?

Use the IXICA provider template to connect your SIP trunk, add the telephone numbers assigned to that trunk, and route each number to a user, ring group, queue or digital receptionist.

Scope: This guide covers voice calling in 3CX V20. SMS/MMS requires separate configuration. Menu labels can vary by V20 update and administrator permissions. Use the account-specific SIP settings supplied by IXICA; do not substitute messaging API credentials.

Before you begin

  • Sign in with a 3CX administrator account permitted to manage the intended trunk and destinations.
  • Have your IXICA provisioning details ready: the authentication method, SIP server or registrar and any proxy settings, SIP authentication credentials if required, main trunk number, and the complete list of DIDs assigned to this trunk.
  • Use 11-digit format for IXICA voice numbers: country code 1 followed by the ten-digit number, with no leading “+”, spaces, brackets or hyphens. Example number: 14165551212.
  • For an on-premise or self-hosted installation, run the 3CX firewall check before configuring the trunk.
  • If changing an existing live trunk, record its current settings and plan the change with your administrator.

References: 3CX SIP trunk setup and IXICA’s 3CX information.

Step 1 — Select the IXICA template

  1. Open Admin → Voice & Chat.
  2. Select Add Trunk.
  3. Enter a descriptive trunk name, such as IXICA – Main Office (example name).
  4. Under SIP Trunk Details, select Canada and look for IXICA in the Trunk provider list.
  5. Select the IXICA template. If it is not available, confirm your V20 build and template availability with your 3CX administrator or IXICA before substituting a generic or unrelated provider template.

IXICA confirms that an official 3CX trunk template is available. 3CX lists IXICA in its VoIP Provider Tested category; this is distinct from testing performed directly by 3CX.

References: IXICA template information, 3CX provider index and 3CX setup workflow.

Step 2 — Enter your IXICA SIP account details

  1. Review the authentication method selected by the template and confirm that it matches your IXICA provisioning instructions.
  2. Enter the main trunk number in 11-digit format, for example 14165551212 (example only). Do not include a leading “+” or punctuation.
  3. For registration-based service, enter the SIP authentication ID and password supplied by IXICA, together with any required registration details.
  4. For IP-based service, use the IP/peering settings supplied by IXICA and confirm with IXICA which public PBX IP is authorised.
  5. Review any server, registrar or proxy fields exposed by the template. Use IXICA’s supplied values where required; do not overwrite template defaults without a provisioning instruction.
Do not guess connection settings. There is no universal server address, password, transport, port or authentication method specified in this FAQ. These must come from your service provisioning. A mysms API key is not a SIP password. If an IP-based PBX changes its public IP, coordinate that change with IXICA.

Step 3 — Choose the default incoming-call destination

  1. In the trunk configuration, set the default route to the intended fallback destination.
  2. Use a destination that is appropriate for calls to DIDs not assigned to a user or system extension.

Important: The default route is not an override for every number. Once a DID—including the main number—is assigned to a user, IVR or another system extension, that assignment takes precedence over the trunk’s default route for that DID.

Step 4 — Add multiple DID numbers to the trunk

A DID is a direct telephone number. When IXICA delivers multiple DIDs through the same SIP trunk, add those numbers to that trunk’s DID list rather than creating a duplicate trunk for each number.

  1. Open the trunk’s DID Numbers tab.
  2. Click +Add.
  3. Enter a DID assigned by IXICA to this trunk in 11-digit format, for example 14165551212 (example only), without a leading “+” or punctuation.
  4. Repeat +Add for every additional DID.
  5. Review the list and check whether the main trunk number is already included before adding it again.
  6. Under Options → Limit to, choose system-wide or the appropriate department. A department-restricted trunk’s DIDs are visible only within that department.
  7. Click Save.

For a larger list: 3CX also supports importing DID numbers. Use the sample CSV linked in the official SIP trunk guide for the required structure instead of guessing column names.

Adding a number in 3CX does not provision it with IXICA. Confirm that every listed DID has been assigned to your service and is being delivered to the intended trunk.

Step 5 — Route each DID to its destination

To send a DID directly to a user

  1. Go to Admin → Users and open the intended user.
  2. On the General tab, locate Assigned DID Number(s).
  3. Select the DID and save the user.
  4. Repeat for other users and their assigned numbers.

To send a DID to an IVR, ring group or queue

  1. Go to Admin → Call Handling.
  2. Open the intended IVR/digital receptionist, ring group or queue.
  3. Select the DID under Assigned DID Number(s) and save.
  4. Repeat for each additional destination. If several numbers should reach the same destination, select the relevant numbers in that destination’s assignment field where supported by your configuration.

Example routing plan — replace with your own numbers

DID placeholder Example destination Where to assign it
[MAIN DID] Main IVR Admin → Call Handling
[SALES DID] Sales queue Admin → Call Handling
[SUPPORT DID] Support ring group Admin → Call Handling
[DIRECT USER DID] Individual user Admin → Users → General

These labels are placeholders, not telephone numbers or required destination names. Adding DIDs and assigning their destinations are separate tasks; complete both.

Reference for Steps 2–5: 3CX SIP trunk and DID routing instructions.

Step 6 — Configure outbound calling and caller ID

  1. If saving the new trunk opens the outbound-rule page, configure the rule there. Otherwise, open Admin → Outbound Rules → Add.
  2. Name the rule and choose the intended matching conditions, such as number prefix, number length, calling extensions or departments.
  3. Under Make outbound calls on, select the IXICA trunk as the intended route.
  4. For standard Canadian/US calls, configure Strip Digits and Prepend as needed so the number sent to IXICA is 11 digits, for example 14165551212 (example only), without a leading “+”. Have your administrator handle international and special-number dialling separately rather than applying this ordinary-number format to every call.
  5. Review any Outbound Caller ID override. Use only a caller ID approved for your service.
  6. Save and check the rule’s position: 3CX evaluates outbound rules from top to bottom.

3CX documents that outbound calls use the main trunk number by default, or an assigned user DID by default when one is assigned. Explicit caller-ID settings and provider handling can affect the number presented. Test caller ID from each relevant user rather than assuming that every incoming DID automatically becomes a selectable outbound identity.

References: 3CX outbound routing and 3CX caller-ID defaults.

Step 7 — Test the trunk and every DID

  • Trunk status: For a registration-based trunk, confirm registration. An IP-based trunk can appear green without proving that the service is reachable; real call tests are still required.
  • Inbound: Call every DID from an external telephone and confirm that the intended user, IVR, queue or ring group receives it.
  • Fallback: If you intentionally leave a delivered DID unassigned, call it and verify the trunk’s default route.
  • Outbound: Call an external telephone from each relevant user or department and check the number displayed at the receiving end.
  • Audio: Confirm that both parties can hear each other. Test hold and transfer if they form part of your normal workflow.
  • Hours: If destinations have business-hours or after-hours behaviour configured, test both cases.

IP-based status caveat: 3CX outbound-routing notes. The call checks above are a recommended acceptance checklist, not a claim that this installation has been tested.

Common questions and troubleshooting

Do I need a separate SIP trunk for every DID?

Not when those numbers are delivered through the same IXICA trunk. Add them to that trunk’s DID Numbers list and assign their destinations individually. If IXICA has provisioned separate trunks or accounts, follow that service design instead.

Why do all numbers go to the same place?

Check whether the DIDs are assigned under Users or Call Handling. Unassigned DIDs use the default route. If assignments look correct, ask your administrator to compare the called number arriving from IXICA with the DID stored in 3CX and confirm that IXICA is delivering each number correctly.

Why is a DID missing from the assignment list?

Check that the DID was added to the correct trunk and saved. Also check the trunk’s Limit to setting: a department-restricted trunk limits DID visibility to that department. Review existing assignments before changing them.

Which number format should I use?

For IXICA voice configuration, use 11 digits: 14165551212 (example only). Include the leading country code 1, but no “+”, spaces, brackets or hyphens. Apply this format to the main trunk number and additional voice DIDs.

Keep SMS separate: 3CX’s general SMS documentation specifies E.164 DID numbers with a leading “+”. That differs from the IXICA voice format supplied for this guide. Before enabling SMS on the same trunk, confirm the combined configuration with IXICA rather than changing working voice DIDs to “+” format based on the general SMS instructions alone.

Does adding a DID also enable SMS/MMS?

No—this voice setup does not configure the messaging integration. Complete the separate IXICA SMS/MMS FAQ and confirm messaging availability for each number you intend to use.

What if registration or calls fail?

Recheck the authentication method, provisioning values, number format, destination assignments and outbound rule. For IP-based service, confirm the authorised public IP with IXICA. Use the 3CX SIP Trunk checker and relevant logs with your administrator. Provide IXICA support with the failed call’s time and timezone, direction, calling and called numbers, and any error shown. Never post SIP passwords, API keys or private webhook URLs publicly.

Final checklist

  • IXICA template selected and service-specific SIP settings entered.
  • Main number and all additional voice DIDs entered in 11-digit format, without a leading “+” or punctuation, and checked against IXICA’s provisioning.
  • Default route, department scope and individual DID destinations saved.
  • Outbound rules and permitted caller IDs configured.
  • Every DID tested from an external telephone; outbound calling and two-way audio tested.
  • SMS/MMS configured and tested separately if required.

Documentation reviewed: 18 November 2026. Based on the official 3CX SIP trunk guide, outbound-routing guide, provider index, and IXICA’s 3CX page. These are documentation-based instructions, not a test of a live IXICA/3CX installation. Account-specific provisioning takes precedence for connection values.

Share

Back to all FAQ answers